Publications
This is a list of peer-reviewed publications where data from our CT-lab has been used.
2024
Ahmed, H., Kuva, J., Punkki, J., 2024. Analysing entrapped pores in concrete via x-ray computed tomography: Influence of workability and compaction time. Construction and Building Materials 417. 135311. doi: 10.1016/j.conbuildmat.2024.135322
Almeida, J.H.S., Jayparakash, S., Kolari, K., Kuva, J., Kukko, K., Partanen, J., 2024. The role of printing parameters on the short beam strength of 3D-printed continuous carbon fibre reinforced epoxy-PETG composites. Composite Structures. doi: 10.1016/j.compstruct.2024.118034
Bischoff, A., Heap, M.J., Mikkola, P., Kuva, J., Reuschlé, T., Jolis, E.M., Engström, J., Reijonen, H., Leskelä, T., 2024. Hydrothermally altered shear zones: A new reservoir play for the expansion of deep geothermal exploration in crystalline settings. Geothermics 118: 102895. doi: 10.1016/j.geothermics.2023.102895
Reijonen, H., Elminen, T., Heikkilä, P., Kuva, J., Jolis, E.M., 2024. Enhanced Identification of Fracture Smectites and Other Alteration Minerals Via Short-Wave Infrared Reflectance at Two Finnish Crystalline Sites, Olkiluoto and Hyrkkölä. Rock Mechanics and Engineering. doi: 10.1007/s00603-024-03764-2
Reijonen. H.M., Al-Ani, T., Elminen, T., Kuva, J., Issukka, K., Lamminmäki, R., 2024. Fracture smectites in bedrock at Kivetty and Romuvaara sites, Finland as natural analogues for radioactive waste repository buffer. Geoenergy. doi: 10.1144/geoenergy2023-053
Solismaa, S., Muniruzzaman, M., Kuva, J., Szlachta, M., Hyvönen, S., Kauppila, P., Kauppila, T., 2024. Interaction of cemented paste backfill (CPB) and circumneutral mine water during column experiments. Applied Geochemistry. doi: 10.1016/j.apgeochem.2024.105965
2023
Chen, Y., Kuva, J., Mohite, A., Li, Z., Rahier, H., Al-Neshawy, F., Shu, J., 2023. Investigation of the Internal Structure of Hardened 3D-Printed Concrete by X-CT Scanning and Its Influence on the Mechanical Performance. Materials 16: 2534. doi: 10.3390/ma16062534
Dastgerdi, J.N., Jaberi, O., Remes, H., Lehto, P., Hosseini Toudeshky, H., Kuva, J., 2023. Fatigue damage process of additively manufactured 316 L steel using X-ray computed tomography imaging. Additive Manufacturing. 103559. doi: 10.1016/j.addma.2023.103559
Donnelly, L., Pirrie, D., Power, M., Corfe, I., Kuva, J., Lukkari, S., Lahaye, Y., Liu, X., Dehaine, Q., Jolis, E., Butcher, A., 2023. The Recycling of End-of-Life Lithium-ion Batteries and the Phase Characterisation of Black Mass. Recycling 8(4), doi: 10.3390/recycling8040059
Reijonen. J., Revuelta, A., Metsä-Kortelainen, S., Salminen, A., 2023. Effect of hard and soft re-coater blade on porosity and processability of thin walls and overhangs in laser powder bed fusion additive manufacturing. International Journal of Advanced Manufacturing Technology. doi: 10.1007/s00170-023-12853-5
Soinne. H., Keskinen. R., Tähtikarhu, M., Kuva, J., Hyväluoma. J., 2023. Effects of organic carbon and clay contents on structure-related properties of arable soils with high clay content. European Journal of Soil Science e13424 doi: 10.1111/ejss.13424
Toom, U., Kuva, J., Knaust, D., 2023. Ichnogenus Trypanites in the Orovician of Estonia (Baltica). Estonian Journal of Earth Sciences 72, 1. doi: 10.3176/earth.2023.xxx
Yu, Y., Perumal, P., Corfe, IJ., Paul, T., Illikainen, M., Luukkonen, T., 2023. Combined granulation-alkali activation-direct foaming process: A novel route to porous geopolymer granules with enhanced adsorption properties. Materials & Design 227: 111781, doi: 10.1016/j.matdes.2023.111781
2022
Dastgerdi, J.N., Jaberi, O., Remes, H., 2022. Influence of internal and surface defects on the fatigue performance of additively manufactured stainless steel 316L. International Journal of Fatigue 163, doi: 10.1016/j.ijfatigue.2022.107025
Niu, H., Helser, J., Corfe, IJ., Kuva, J., Butcher, AR., Cappuyns, V., Kinnunen, P., Illikainen, M., 2022. Incorporation of bioleached sulfidic mine tailings in one-part alkali-activated blast furnace slag mortar, Construction and Building Materials 333, doi: 10.1016/j.conbuildmat.2022.127195
Puttonen, T., Chekurov, S., Kuva, J., Björkstrand, R., Partanen, J., Salmi, M., 2022. Influence of feature size and shape on corrosion of 316L lattice structures fabricated by laser powder bed fusion. Additive Manufacturing 61: 103288. doi: 10.1016/j.addma.2022.103288
2021
Butcher, AR., Corfe, I., 2021. Geo-inspired science, engineering, construction, art and design. Geology Today, 37, 5, 184-193. doi: 10.1111/gto.12368
Guntoro, P.I., Ghorbani, Y., Parian, M., Butcher, A.R., Kuva, J., Rosenkranz, J., 2021. Development and experimental validation of a texture-based 3D liberation model. Minerals Engineering 164, 106828. doi: 10.1016/j.mineng.2021.106828
Kröger, B., Vinn, O., Toom, U., Corfe, IJ., Kuva, J., Zaton, M., 2021. On the engima of Palaenigma wrangeli (Schmidt), a conulariid with a partly non-mineralized skeleton. Peerj. In press.
Solismaa, S., Torppa, A., Kuva, J., Heikkilä, P., Hyvönen, S., Juntunen, P., Benzaazoua, M., Kauppila, T., 2021. Substitution of Cement with Granulated Blast Furnace Slag in Cemented Paste Backfill: Evaluation of Technical and Chemical Properties. Minerals, 11, 1068, 18 p. doi: 10.3390/min11101068
2020
Akmal, J.S., Salmi, M., Hemming, B., Teir, L., Suomalainen, A., Kortesniemi, M., Partanen, J., Lassila, A., 2020. Cumulative inaccuracies in implementation of additive manufacturing through medical imaging, 3D thresholding, and 3D modeling: A case study for an end-use implant, Applied Sciences 10(8):2968. doi: 10.3390/app10082968
Aerden, D., Ruiz-Fuentes, A., 2020. X-ray computed micro-tomography of spiral garnets: A new test of how they form. Journal of Structural Geology 136. doi: 10.1016/j.jsg.2020.104054
Guntoro, P.I., Ghorbani, Y., Butcher, A.R., Kuva. J., Rosenkranz, J., 2020. Textural Quantification and Classification of Drill Cores for Geometallurgy: Moving Towards 3D with X-ray Microcomputed Tomography. Natural Resources Research.
Lille, M., Kortekangas, A., Heiniö, R.-L., Sozer, N., 2020. Structural and Textural Characteristics of 3D-Printed Protein- and Dietary Fibre-Rich Snacks Made of Milk Powder and Wholegrain Rye Flour. Foods. doi: 10.3390/foods9111527
Reijonen, H., Kuva, J., Heikkilä, P. 2020. Benefits of applying X-ray computed tomography in bentonite based material research focussed on geological disposal of radioactive waste. Environmental Science and Pollution Research. doi: 10.1007/s11356-020-08151-2
Sayab, M., Aerden, D., Kuva, J., Hassan, W.U., 2020. Tectonic evolution of the Karakoram metamorphic complex (NW Himalayas) reflected in the 3D structures of spiral garnets: Insights from X-ray computed micro-tomography. Geoscience Frontiers. doi: 10.1016/j.gsf.2020.11.010
2019
Ojala, A., Mattila, J., Ruskeeniemi, T., Palmu, J-P., Nordbäck, N., Kuva, J., Sutinen, R., 2019. Postglacial reactivation of the Suasselkä PGF complex in SW Finnish Lapland. International Journal of Earth Sciences. doi: 10.1007/s00531-019-01695-w
Sayab, M., Molnár, F., Aerden, D., Niiranen, T., Kuva, J., Välimaa, J. (2019) A succession of near-orthogonal horizontal tectonic shortenings in the Paleoproterozoic Central Lapland Greenstone Belt of Fennoscandia: constraints from the world-class Suurikuusikko gold deposit. Mineralium Deposita. doi: 10.1007/s00126-019-00910-7
2018
Ojala, AEK., Mattila, J., Virtasalo, J., Kuva, J., Luoto, TP., 2018. Seismic deformation of varved sediments in southern Fennoscandia at 7400 cal BP., Tectonophysics 744: 58-71. doi:10.1016/j.tecto.2018.06.015
Xu, J., Virolainen, S., Zhang, W., Kuva, J., Sainio, T., Koivula, R., 2018. Polyacrylonitrile-encapsulated amorphous zirconium phosphate composite adsorbent for Co, Nd and Dy separations. Chemical Engineering Journal 351: 832-840. doi: 10.1016/j.cej.2018.06.112
